04-17-2023, 08:42 AM
iCON + Harrison 32Ci 12-channel USB-C Interface
|
04-17-2023, 12:11 PM
(04-14-2023, 11:10 AM)Bejcon Wrote:(04-13-2023, 04:05 PM)dspasic Wrote:(04-13-2023, 03:39 PM)Ben@Harrison Wrote: As a second big surprise announcement this week, we present the iCON+Harrison 32Ci audio interface, shown here at NAMM alongside iCON's new control surfaces: That looks great, be interested to know what the da/and converters are and the sample rate range?
04-19-2023, 09:11 AM
(This post was last modified: 04-20-2023, 06:08 PM by Ben@Harrison.)
Generally speaking, Harrison provided all of the analog signal path and processing while iCON provided the digital side. (there is some overlap, of course)
I do not know the exact converter chip used, but our measurements of the prototype were very good. They are definitely using high-end devices with better than 120dB performance on both sides (ADC and DAC). On the analog side: the mic inputs have 70dB gain, suitable for ribbon mics. The line-out and headphones have a very hefty output. We specified a dedicated power-supply so we wouldn't have to depend on the host power. The outputs are 'broadcast quality' electronically balanced suitable for driving 600ohm loads at up to +24dBU. Even the headphone outputs are very high-end. After our testing of the prototype, I can pretty confidently say that you've never heard anything this good, and certainly not at the price point this is going to hit (~$500).
04-19-2023, 08:53 PM
(This post was last modified: 04-20-2023, 06:08 PM by Ben@Harrison.)
(04-19-2023, 09:11 AM)Ben@Harrison Wrote: Generally speaking, Harrison provided all of the analog signal path and processing while iCON provided the digital side. (there is some overlap, of course) Ben, WOW, nice price point! And bang for the buck. That is budget friendly! Thanks
Win10 64 i5 3330 Quad Core, AVL/MXE i5, MB 3-9, MB32C 3-9, Tascam US 20x20(2), Tascam 388, Alesis HD24, Alesis ML 9600(2), A&H GL2400, Soundcraft Studio Spirit 24, Roland Integra7, Roland S-50, M-Audio Hammer 88, ART/ MPA Gold/ TPSII/Pro Channel(2)/Pro VLA(3), lots of tubes
04-20-2023, 08:03 AM
04-20-2023, 10:06 AM
(04-20-2023, 08:03 AM)superb Wrote:(04-14-2023, 12:32 AM)Sojuzstudio Wrote: Nice device. Is this a Class compliant device or does it require drivers? If required, does it also work on Linux? This would be cheaper than the RME Babyface pro FS and if it runs on Linux like RME I could put my money into that too. In that light, that would be delicious. But if Linux isn't supported, it's a bitter disappointment.
Small recordingstudio in Finland countryside. Mixbus 10 Pro, AvLinux AVL-MXe 23.2, Rme UFX+, Rme 802, Adam A77X, Genelec 8020c, Genelec 7050b, Yamaha HS7
04-20-2023, 10:14 AM
It is a class-compliant USB-C device, it 'just works' on mac. I'm not sure what this means for linux though.
On Windows, it will require an ASIO driver to be installed (just like any other pro-audio device)
04-20-2023, 10:27 AM
(This post was last modified: 04-20-2023, 10:58 AM by Sojuzstudio.)
(04-20-2023, 10:14 AM)Ben@Harrison Wrote: It is a class-compliant USB-C device, it 'just works' on mac. I'm not sure what this means for linux though. It means that it may or may not work. After all, RME 100% definitely works. So I wouldn't dare test just for compassion. Edit: Why don't you just connect the iCON+Harrison 32Ci to the Linux machine you have there and see what happens?? It must be easier there than here on the other side of the ocean.
Small recordingstudio in Finland countryside. Mixbus 10 Pro, AvLinux AVL-MXe 23.2, Rme UFX+, Rme 802, Adam A77X, Genelec 8020c, Genelec 7050b, Yamaha HS7
(04-20-2023, 10:14 AM)Ben@Harrison Wrote: It is a class-compliant USB-C device, it 'just works' on mac. I'm not sure what this means for linux though. Thanks Ben. I've found that while many class compliant devices work out of the box with linux, some like my MOTU 8pre-ES don't. Fortunately I wasn't the only one trying to use one of the newer MOTU interfaces and a considerable amount of effort was put forth by a bunch of people over at the linuxmusicians forum to come up with some solutions. I'll wait until someone has confirmed that there are no problems with the 32Ci and linux before ordering.
05-10-2024, 06:12 AM
It will be provided with Mixbus 32C?
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)