07-22-2015, 04:38 PM
(This post was last modified: 10-02-2015, 02:40 PM by Mike@Harrison.)
"Interim Releases" are Mixbus packages that allow users to view the current state of Mixbus development between official releases. Interim releases are best-suited to technical users who are comfortable installing and managing multiple versions of software on their machines.
You should only download an "interim release" if it fixes an important critical bug for you. Interim releases allow us to fix specific issues for our users, or beta-test new features. They are not as thoroughly tested as official releases, so you may find that an interim release is not as stable as the official releases (even if they fix some particular issues for you). They might even cause damage to your session files, so please make a backup of any important sessions before opening them in an interim release.
Currently, we are providing these packages to our registered forum members. Mixbus v3 is still a very new product and we want to provide fast and free access to updates without the delays associated with an official release schedule.
In the future, we expect Interim Releases to become an exclusive benefit for our "Plugged-In Membership"
Please do not post these links outside our forum, because the links are not permanent, and they do not represent a finished state.
If you have questions or comments, please reach us at: mixbus@harrisonconsoles.com
NOTE: If you purchased Mixbus v3 after Wednesday July30, then you probably already have this version. You can check your current version by visiting the "About" page. If the version says 3.0-1268 then you do not need to download this package.
This package solves several minor issues (listed below). Some recently-reported issues with Windows ASIO I/O and VST plugins are still in development.
Mac 64bit:
http://www.harrisonconsoles.com/mixbus/m...-osx64.dmg
Mac 32bit:
http://www.harrisonconsoles.com/mixbus/m...-osx32.dmg
Windows 64bit:
http://www.harrisonconsoles.com/mixbus/m...-Setup.exe
NOTE: Windows users, your plugins will be re-scanned at startup
Windows 32bit:
http://www.harrisonconsoles.com/mixbus/m...-Setup.exe
NOTE: Windows users, your plugins will be re-scanned at startup
Windows 64bit (debug version: larger download, for Harrison troubleshooting)
http://www.harrisonconsoles.com/mixbus/m...-Setup.exe
Linux 64 bit:
http://www.harrisonconsoles.com/mixbus/m...0.1268.tar
Linux 32 bit:
http://www.harrisonconsoles.com/mixbus/m...0.1268.tar
Interim build 1268 includes 400+ changes since the 3.0-844 release. A selection of notable changes is listed below:
Windows-specific fixes:
Waves VST plugins: tentative fix for title of Waves "Shell" plugins
Fix for 32/64 parallel installs ( use separate cache and blacklist for 32/64 bit VST's )
Allow verbose VST scanning, providing more details in the Log window.
Mac-specific fixes:
Fix right-click context menu crash ( for renaming mix-buses )
Rework AU scanning and discovery ( a failed scan will no longer prevent previously-scanned AUs from working )
Fix SetBfree instrument when running on 32bit Mac OSX
Fix "analyze" feature for AU plugins
Fix the localhost address on Mac OS X, enabling the video player
Linux-specific fixes:
Fix various packaging errors, allowing 32bit Linux package to work on AVLInux and other 32bit distributions
Theme changes:
Provide user control over mixer strip scale ( see: Preferences->GUI )
Provide user control over mixer strip background color (see Theme -> gtk_background )
Provide user control over "mixer strip texture opacity"
Mixer signal-Flow and Plugin fixes:
Fix mix-bus and master-bus "input" metering selection
Fix for plugins with 3+ outputs: maintain 1-1 routing to the channel output
Prevent multiple concurrent plugin scans
Locale & language fixes:
Improved support for non-English accented characters in audio filenames
Fix for licensing file in non-English locales
Support for non-English characters in audio device names
By default, Mixbus now uses English language, even if your OS uses a different locale ( if desired, enable translations in Preferences->User Interaction )
Video fixes:
Tweak video import dialog (handle non-video file extensions)
Add MXF file as a supported video format
Automation workflow fixes:
Clicking an automation track line without a move adds a point on the line.
Make automation line / gain line cursors consistent.
Automation selection fixes.
- display selected control points in region gain lines
- display selected points in internal edit mode
- allow dragging of region gain lines in MouseContent mode
Fix a potential crash when draggin automation line.
Single control points can now be dragged up and down properly.
- preserves the zero notch, but doesn't mess up the cumulative drag.
Don't add history by clicking a control point, fix control point selection.
Fix thinko in automation write undo.
- also allow saved automation list state to be touch or off if
actually in write mode.
Fix lack of tempomap undo in Editor::insert_time ()
Unbreak region brush drag wrt undo, avoid some dangling commands in the gui
- also allow moving of automation lines in internal mouse mode.
- this is also a first pass at ensuring that if an operation does
nothing, avoid an undo entry.
Add undo for automation touch & write passes.
Fix some workflow problems wrt automation.
- clearing automation points sets control to "off" rather than touch.
- multiple touches on the same pass acts consistently (no more
fader jumps on mouse button press
- use actual value for initial point rather than some arbitrary
default. clarify new semantics of add () (with_default->with_initial).
- add guard points as needed in stop.
Stability & Performance tweaks:
Fix auditioning on systems with larger disk read chunk sizes.
Fix pre-fader insert mute
Fix some problems when copy/pasting plugins
Improve performance and reduce jitter in "stationary playhead" mode.
Add context menu to hide/show all Midi-tracks
Fix various issues when deleting midi region during step-edit
Remove Track Templates menu item from mixbuses
Remove "bounce-with-processing" which is not supported in Mixbus
Implement scroll-wheel support for ClickBoxes
Use “1” as small-step for integer controls.
Fix “Show waveform in regions” Preference.
You should only download an "interim release" if it fixes an important critical bug for you. Interim releases allow us to fix specific issues for our users, or beta-test new features. They are not as thoroughly tested as official releases, so you may find that an interim release is not as stable as the official releases (even if they fix some particular issues for you). They might even cause damage to your session files, so please make a backup of any important sessions before opening them in an interim release.
Currently, we are providing these packages to our registered forum members. Mixbus v3 is still a very new product and we want to provide fast and free access to updates without the delays associated with an official release schedule.
In the future, we expect Interim Releases to become an exclusive benefit for our "Plugged-In Membership"
Please do not post these links outside our forum, because the links are not permanent, and they do not represent a finished state.
If you have questions or comments, please reach us at: mixbus@harrisonconsoles.com
NOTE: If you purchased Mixbus v3 after Wednesday July30, then you probably already have this version. You can check your current version by visiting the "About" page. If the version says 3.0-1268 then you do not need to download this package.
This package solves several minor issues (listed below). Some recently-reported issues with Windows ASIO I/O and VST plugins are still in development.
Mac 64bit:
http://www.harrisonconsoles.com/mixbus/m...-osx64.dmg
Mac 32bit:
http://www.harrisonconsoles.com/mixbus/m...-osx32.dmg
Windows 64bit:
http://www.harrisonconsoles.com/mixbus/m...-Setup.exe
NOTE: Windows users, your plugins will be re-scanned at startup
Windows 32bit:
http://www.harrisonconsoles.com/mixbus/m...-Setup.exe
NOTE: Windows users, your plugins will be re-scanned at startup
Windows 64bit (debug version: larger download, for Harrison troubleshooting)
http://www.harrisonconsoles.com/mixbus/m...-Setup.exe
Linux 64 bit:
http://www.harrisonconsoles.com/mixbus/m...0.1268.tar
Linux 32 bit:
http://www.harrisonconsoles.com/mixbus/m...0.1268.tar
Interim build 1268 includes 400+ changes since the 3.0-844 release. A selection of notable changes is listed below:
Windows-specific fixes:
Waves VST plugins: tentative fix for title of Waves "Shell" plugins
Fix for 32/64 parallel installs ( use separate cache and blacklist for 32/64 bit VST's )
Allow verbose VST scanning, providing more details in the Log window.
Mac-specific fixes:
Fix right-click context menu crash ( for renaming mix-buses )
Rework AU scanning and discovery ( a failed scan will no longer prevent previously-scanned AUs from working )
Fix SetBfree instrument when running on 32bit Mac OSX
Fix "analyze" feature for AU plugins
Fix the localhost address on Mac OS X, enabling the video player
Linux-specific fixes:
Fix various packaging errors, allowing 32bit Linux package to work on AVLInux and other 32bit distributions
Theme changes:
Provide user control over mixer strip scale ( see: Preferences->GUI )
Provide user control over mixer strip background color (see Theme -> gtk_background )
Provide user control over "mixer strip texture opacity"
Mixer signal-Flow and Plugin fixes:
Fix mix-bus and master-bus "input" metering selection
Fix for plugins with 3+ outputs: maintain 1-1 routing to the channel output
Prevent multiple concurrent plugin scans
Locale & language fixes:
Improved support for non-English accented characters in audio filenames
Fix for licensing file in non-English locales
Support for non-English characters in audio device names
By default, Mixbus now uses English language, even if your OS uses a different locale ( if desired, enable translations in Preferences->User Interaction )
Video fixes:
Tweak video import dialog (handle non-video file extensions)
Add MXF file as a supported video format
Automation workflow fixes:
Clicking an automation track line without a move adds a point on the line.
Make automation line / gain line cursors consistent.
Automation selection fixes.
- display selected control points in region gain lines
- display selected points in internal edit mode
- allow dragging of region gain lines in MouseContent mode
Fix a potential crash when draggin automation line.
Single control points can now be dragged up and down properly.
- preserves the zero notch, but doesn't mess up the cumulative drag.
Don't add history by clicking a control point, fix control point selection.
Fix thinko in automation write undo.
- also allow saved automation list state to be touch or off if
actually in write mode.
Fix lack of tempomap undo in Editor::insert_time ()
Unbreak region brush drag wrt undo, avoid some dangling commands in the gui
- also allow moving of automation lines in internal mouse mode.
- this is also a first pass at ensuring that if an operation does
nothing, avoid an undo entry.
Add undo for automation touch & write passes.
Fix some workflow problems wrt automation.
- clearing automation points sets control to "off" rather than touch.
- multiple touches on the same pass acts consistently (no more
fader jumps on mouse button press
- use actual value for initial point rather than some arbitrary
default. clarify new semantics of add () (with_default->with_initial).
- add guard points as needed in stop.
Stability & Performance tweaks:
Fix auditioning on systems with larger disk read chunk sizes.
Fix pre-fader insert mute
Fix some problems when copy/pasting plugins
Improve performance and reduce jitter in "stationary playhead" mode.
Add context menu to hide/show all Midi-tracks
Fix various issues when deleting midi region during step-edit
Remove Track Templates menu item from mixbuses
Remove "bounce-with-processing" which is not supported in Mixbus
Implement scroll-wheel support for ClickBoxes
Use “1” as small-step for integer controls.
Fix “Show waveform in regions” Preference.