32C EQ: LP & HP on MCU - How? ( SOLVED )

[jabney]

Learning about X-Touch and the EQ channels. According to the live-manual:

"EQ: To use the EQ controls, you must first “select” a channel using a channel Select button. The 8 knobs will switch to show the selected channel’s EQ settings (this varies for channels vs mixbuses vs master bus.)."

Does that mean you are limited to 8 knobs? The 32C EQ should ideally have 10 knobs because of the very useful LP and HP. Would adding an 8 channel extender add the 2 'missing' LP & HP knobs?

Or is there another way?

[superb]

Learning about X-Touch and the EQ channels. According to the live-manual:

"EQ: To use the EQ controls, you must first “select” a channel using a channel Select button. The 8 knobs will switch to show the selected channel’s EQ settings (this varies for channels vs mixbuses vs master bus.)."

Does that mean you are limited to 8 knobs? The 32C EQ should ideally have 10 knobs because of the very useful LP and HP. Would adding an 8 channel extender add the 2 'missing' LP & HP knobs?

Or is there another way?

HP/LP are on the compressor page.

[jabney]

HP/LP are on the compressor page.

Thanks for the info! Makes sense to do it that way.

best, john