09-14-2018, 02:32 AM
(This post was last modified: 09-14-2018, 02:19 PM by Ben@Harrison.)
Learning about X-Touch and the EQ channels. According to the live-manual:
"EQ: To use the EQ controls, you must first “select” a channel using a channel Select button. The 8 knobs will switch to show the selected channel’s EQ settings (this varies for channels vs mixbuses vs master bus.)."
Does that mean you are limited to 8 knobs? The 32C EQ should ideally have 10 knobs because of the very useful LP and HP. Would adding an 8 channel extender add the 2 'missing' LP & HP knobs?
Or is there another way?
"EQ: To use the EQ controls, you must first “select” a channel using a channel Select button. The 8 knobs will switch to show the selected channel’s EQ settings (this varies for channels vs mixbuses vs master bus.)."
Does that mean you are limited to 8 knobs? The 32C EQ should ideally have 10 knobs because of the very useful LP and HP. Would adding an 8 channel extender add the 2 'missing' LP & HP knobs?
Or is there another way?