Tascam Model 24 control surface

[Joan Asin]

I have the Tascam Model 24 and my question is if I can use it as a control surface for Harrison Mixbus 10

[MikeTPR]

I have the Tascam Model 24 and my question is if I can use it as a control surface for Harrison Mixbus 10

Hi, Im pretty sure the Model 16/24 is not a D.A.W. control surface. Only the Model 12 acts as a control surface.

The Model 16/24 has USB audio interface capability only.

I don't think you can use it as a controller in either Mixbus10 or any other DAW. 

[Dingo]

I have the Tascam Model 24 and my question is if I can use it as a control surface for Harrison Mixbus 10

Hi Joan Asin,
Welcome to the Mixbus forum.
@MikeTPR appears to be correct, whilst the Model24 can act as an audio I/O with Mixbus or other DAW, it does not appear to be designed as a controller.
Here is a comparison chart for the Tascam range.
Having said that I (being a skeptic) would give it a try... just to see if the 'experts' are wrong.

[Joan Asin]

Thanks, you are right, Models 16 and 24 cannot be used as DAW controllers, but Model 12 can. My question is if the Tascam Model 12 can work as a controller with the new Mixbus 10

[Dingo]

Thanks, you are right, Models 16 and 24 cannot be used as DAW controllers, but Model 12 can. My question is if the Tascam Model 12 can work as a controller with the new Mixbus 10

From what I see of the Tascam 12 from product reviews etc, it is Mackie enabled and Mixbus supports Mackie protocol.
This does not guarantee that every single controller will be mapped.
I do not know of anyone with a Tascam12 so cannot help there.
My advice would be to download a demo of v10 and try it out with the Tascam 12 before you buy.