01-09-2021, 11:38 PM
I chose Control Surface > Generic CC - then chose NanoKontrol2 for Incoming MIDI and Outgoing MIDI and then in the MIDI Bindings dropdown chose NanoKontrol2.
I then also clicked Enable Feedback.
I'm starting the NanoKontrol2 while holding Cycle and Set to put it in CC mode
The controls work but the LEDs don't stay on when I set a track to record, mute or solo. Same for Stopped, Play, Record in the MMC controls.
I wouldn't be asking this question except while I was figuring out how to setup the NanoKontrol2 I got it working in Mackie Control mode with the NanoKontro2 set to one of the DAW modes and the LEDs stayed on. While that was working when I launched Mixbus the stop button would light up on the NanoKontrol2. Then if I set a track to record mode its "R" button would stay lit. I couldn't reproduce that setup later even though I started up the NanoKontrol2 in each DAW mode. Sonar was the closest but Mixbus was picking up continuous messages from the NanoKontrol2 causing the Manual, Play Write Touch Latch button to cycle continuously. In other cases while experimenting the fader would bounce up and down.
Thanks,
I then also clicked Enable Feedback.
I'm starting the NanoKontrol2 while holding Cycle and Set to put it in CC mode
The controls work but the LEDs don't stay on when I set a track to record, mute or solo. Same for Stopped, Play, Record in the MMC controls.
I wouldn't be asking this question except while I was figuring out how to setup the NanoKontrol2 I got it working in Mackie Control mode with the NanoKontro2 set to one of the DAW modes and the LEDs stayed on. While that was working when I launched Mixbus the stop button would light up on the NanoKontrol2. Then if I set a track to record mode its "R" button would stay lit. I couldn't reproduce that setup later even though I started up the NanoKontrol2 in each DAW mode. Sonar was the closest but Mixbus was picking up continuous messages from the NanoKontrol2 causing the Manual, Play Write Touch Latch button to cycle continuously. In other cases while experimenting the fader would bounce up and down.
Thanks,