Posts: 659
Threads: 57
Joined: Jan 2014
Reputation:
43
Hello, All -
In the preferences, it seems I should be able to assign a K-20 type meter
to the MASTER channel. But, even though that option is selected, the
Master channel still shows a K-14 meter.
Is this a bug?
MB32C - 6.0.702
Thanks!
Patrick
Posts: 3,148
Threads: 441
Joined: Sep 2013
Reputation:
40
I think by selecting a K value will not change the meter GUI that is normal. The same meter shows zero always at the signal value chosen as a K.
Win7/64, Mixbus32C, Mixbus2.5 the Queen
UR22, Dynaudio BM5A MKII, Pc all SSD,
Posts: 41
Threads: 3
Joined: Sep 2019
Reputation:
0
I think that changing the value of K has no effect on the VU meter. It only applies to the completely useless meter at the top next to the timeline.
Mixbus/Mixbus32C v6, UA Apollo Twin MkII, Faderport 8, Win10x64, i5-6300HQ, 16 GB RAM, BM6A, NS-10M...
Posts: 242
Threads: 32
Joined: Jun 2015
Reputation:
12
(04-26-2020, 01:29 PM)JiriR Wrote: completely useless meter at the top next to the timeline.
yes, it is. luckily, you have an option to remove it (in Preferences)
Windows 7 x64 SP1
Mixbus 32C 7.1.92
Posts: 659
Threads: 57
Joined: Jan 2014
Reputation:
43
Yes, I've already specified the type of Master meter to "K-20" in the Meterbridge
options, and that displays and operates as expected.
However, the meter of the Master bus strip in the mixer display still displays,
and acts, as a K-14 type.
It seems to me that both of these meters should follow the same specification.
And, while I'm thinking about it...
Why do I still see those little "bouncy" peak indicators floating around above "0"
in the meterbridge master section when the master channel limiter is engaged?
Shouldn't that show a hard-stop at "0" (or "-1") ??
Thanks!
Patrick