Common issues Icon Qcon Pro G2 - Mixbus V.6 (Video) - (Solved)

[Till]

1. Function Keys (F1-F8) cannot be overwritten.
2. Scrub not working (essential)
3. Master Fader controls the Monitor Button but not the Master Fader.

[Till]

1. Function Keys (F1-F8) cannot be overwritten.
This has been fixed with the latest update. Working now.

2. Scrub not working (essential)!!!
3. Master Fader controls the Monitor Button but not the Master Fader.

[Till]

The Faders are horrible jittering.
This is a Mixbus issue.
I calibrate the Fader to 135. (Advice by Icon)
This is what Mixbus is doing:
(I just moved the fader from -6db to 0db one time)
It goes simply nuts.

https://drive.google.com/file/d/1Sjh38ns...zfFhc/view

And this is with Cubase 10.5
(I moved the Fader up and down for a while)

https://drive.google.com/file/d/1lwAZVG3...05Wjf/view

Still horrible noise but at least working.

[Till]

The Faders are horrible jittering.

https://drive.google.com/file/d/1lwAZVG3...05Wjf/view

Still horrible noise but at least working.

For an unknown reason, it's working now.
No more jitter.
For an unknown reason, Mixbus wrote the automation like this:
See Picture
I cleared all automation and wrote again. Good now.

[whiskeynipple0088]

thank you for posting the solution - even though there really wasnt one.
was the automation written via physical fader movement? - just wondering cuz I have not yet tried writing automation via my Qcon Pro X faders.

[Till]

thank you for posting the solution - even though there really wasnt one.
was the automation written via physical fader movement? - just wondering cuz I have not yet tried writing automation via my Qcon Pro X faders.

The Qcon Pro G2 is fantastic and solid. Mixbus gives me direct access to all important parameters right away and just the one I need. With Cubase it's heavily overloaded with a journey through endless subpages.

My mistake was:
"You dont do anything unless you did a calibration"
1. Turn the device off. Hold the Rec Button on channel 2 and turn it on.
Set all values with the rotating knobs to 185. Press(!) the rotating knob no.8 to confirm. Turn off.
2. Hold Rec. Button no. 7 down and turn the device on. Move each fader up and down a bit. Turn it off and on again. (No confirm needed).

So I made a recording of automation, wondering the nuts fader, start whining, but did not look to the automation curve, who record the crap with uncalibrated faders. Afterward, you can calibrate as much as you want. The garbage has been written already.

So I'm ready to make a new song:
"You give me scrub Mr. Harrison"

[Clint]

I have the same crazy fader movements when using a Mackie Logic Control.
I have not thought to re-calibrate before writing automation, I’ll try that!