Posts: 518
Threads: 11
Joined: Dec 2013
Reputation:
31
Maybe the frequency display should reflect the knob position in % rather than attempt to show actual frequency?  
Mixbus 32C, Debian Bookworm/KDE, EVE SC205 + ADAM Sub 8 monitors, Soundcraft Compact 4, M-Audio 2496, i5 6500, 16GB RAM, WD Blue SSD 1TB, 48" LG OLED, other stuff.
Work as house engineer at a popular venue in Melbourne AU. On a quest for the holy grail, the perfect amount of cowbell.
Posts: 681
Threads: 44
Joined: Sep 2013
Reputation:
36
Posts: 821
Threads: 155
Joined: Feb 2017
Reputation:
19
Windows 10 64, HP Z-220 Workstation, I7 3770 16 GB RAM, RME Multiface 2, PCIe
Mac OS Sierra, 2012 Mac Mini, i5 16 GB RAM, Behringer XR18
Mixbus 32C 6.2.26
Harrison MixBus V5.2
Presonus Studio One 5
Statesboro, GA, USA
Posts: 636
Threads: 6
Joined: Oct 2013
Reputation:
22
(02-13-2020, 02:10 PM)sunrat Wrote: Maybe the frequency display should reflect the knob position in % rather than attempt to show actual frequency?
Epic.
Fwiw the first time I tried v6 I checked it out and saw it showed the frequencies. Played around with it for a minute. And am not sure I’ve paid any attention to the readout again. So for those that wanted it, I’m happy for ya. Just be careful what you wish for.
Posts: 233
Threads: 13
Joined: Jan 2016
Reputation:
15
 You guys are killing me.  Maybe someone will ask for a Toggle? 
Win10 64 i5 3330 Quad Core, AVL/MXE i5, MB 3-9, MB32C 3-9, Tascam US 20x20(2), Tascam 388, Alesis HD24, Alesis ML 9600(2), A&H GL2400, Soundcraft Studio Spirit 24, Roland Integra7, Roland S-50, M-Audio Hammer 88, ART/ MPA Gold/ TPSII/Pro Channel(2)/Pro VLA(3), lots of tubes
Posts: 681
Threads: 44
Joined: Sep 2013
Reputation:
36
02-14-2020, 04:24 PM
(This post was last modified: 02-14-2020, 05:40 PM by Jostein.)
(02-13-2020, 10:01 PM)Theotherguy Wrote: You guys are killing me. Maybe someone will ask for a Toggle?
It can probably not be done, because that involves parallel universes and will, therefore, start debates about quantum mechanics and string theories!
EDIT: That toggle might actually be a good idea.
Posts: 518
Threads: 11
Joined: Dec 2013
Reputation:
31
Mixbus 32C, Debian Bookworm/KDE, EVE SC205 + ADAM Sub 8 monitors, Soundcraft Compact 4, M-Audio 2496, i5 6500, 16GB RAM, WD Blue SSD 1TB, 48" LG OLED, other stuff.
Work as house engineer at a popular venue in Melbourne AU. On a quest for the holy grail, the perfect amount of cowbell.
Posts: 681
Threads: 44
Joined: Sep 2013
Reputation:
36
(02-14-2020, 05:23 PM)sunrat Wrote: (02-14-2020, 04:24 PM)Jostein Wrote: (02-13-2020, 10:01 PM)Theotherguy Wrote: You guys are killing me. Maybe someone will ask for a Toggle?
It can probably not be done, because that involves parallel universes and will, therefore, start debates about quantum mechanics and string theories!
Scientists in China recently entwined a qubit over 50km. Maybe it will be possible soon.
If that happens, then it will start to grow living hairs on that Hz label that will pop out of the monitors and tickle you under your arms and nose so you can't stop laughing and sneezing all the time while your mixing.
It will be nearly impossible to mix under those circumstances so I really hope that this will never happen!
Posts: 8
Threads: 1
Joined: Apr 2022
Reputation:
0
(02-12-2020, 11:23 AM)sondy Wrote: Hi the low eq band on v 6 is displaying the wrong freq values on low shelf band but it displays the correct values on bell mode
Oh wow me too.. V8.. It was fine before.. The low shelf eq does display the wrong value..
But on Bell Mode, it's correct. What do I do.
|
