Hi there,
My name is Aleks and this is my very first post here.
I've tried to use the forum's "search" function to find a solution to my problem, but I was unsuccessful and I couldn't solve my problem either after reading carefully the online manual... so, in advance, I'm very sorry if this issue has already been discussed in the past.
A few days ago I switched from Pro Tools (thanks to the lovely $79 "10 Year Anniversary Offer")... I'm a newbie with Mixbus 32C and it seems like I really can't find my way in doing very simple things such as setting up a hardware insert on a track without causing a loop feedback.
I need to do a very quick pre-master reference CD for a friend of mine using my beloved analog hardware. So I started with a new project in Mixbus 32C and imported the tracks.
The soundcard I'm using is a RME UCX hooked to a RME ADI-2 Pro FS (high quality stereo ADDA unit) via SPDIF.
Now, here is the workflow I try to set up :
Stereo track "Port Insert Send/Output" to "hardware" SPDIF L & R -> UCX -> ADI-2 Pro FS (DA) -> Manley Massive Passive -> Manley Variable-Mu -> SSL Six with Portico 5042 (main insert) -> ADI-2 Pro FS (AD) -> UCX -> Stereo track "Port Insert Return/Input" to "hardware" SPDIF L & R
Then I would add a final limiter plug-in insert (Waves L2), before bouncing.
Mixbus' Master/Monitoring output is routing to output 5-6 of the UCX.
This was pretty much what I was doing with Pro Tools, but that workflow doesn't seem to work in Mixbus and it provokes a nasty loop feedback... what am I doing wrong ?
I feel a bit stupid not being able to do that kind of basic stuff and I really need to dig more into the Mixbus environnement to feel more confortable with it, but I'm a bit in a hurry for this project... could someone share a basic hardware insert template I could use ?
I need your help.
Thank you for your attention.
Cheers,
Aleks
My name is Aleks and this is my very first post here.
I've tried to use the forum's "search" function to find a solution to my problem, but I was unsuccessful and I couldn't solve my problem either after reading carefully the online manual... so, in advance, I'm very sorry if this issue has already been discussed in the past.
A few days ago I switched from Pro Tools (thanks to the lovely $79 "10 Year Anniversary Offer")... I'm a newbie with Mixbus 32C and it seems like I really can't find my way in doing very simple things such as setting up a hardware insert on a track without causing a loop feedback.
I need to do a very quick pre-master reference CD for a friend of mine using my beloved analog hardware. So I started with a new project in Mixbus 32C and imported the tracks.
The soundcard I'm using is a RME UCX hooked to a RME ADI-2 Pro FS (high quality stereo ADDA unit) via SPDIF.
Now, here is the workflow I try to set up :
Stereo track "Port Insert Send/Output" to "hardware" SPDIF L & R -> UCX -> ADI-2 Pro FS (DA) -> Manley Massive Passive -> Manley Variable-Mu -> SSL Six with Portico 5042 (main insert) -> ADI-2 Pro FS (AD) -> UCX -> Stereo track "Port Insert Return/Input" to "hardware" SPDIF L & R
Then I would add a final limiter plug-in insert (Waves L2), before bouncing.
Mixbus' Master/Monitoring output is routing to output 5-6 of the UCX.
This was pretty much what I was doing with Pro Tools, but that workflow doesn't seem to work in Mixbus and it provokes a nasty loop feedback... what am I doing wrong ?
I feel a bit stupid not being able to do that kind of basic stuff and I really need to dig more into the Mixbus environnement to feel more confortable with it, but I'm a bit in a hurry for this project... could someone share a basic hardware insert template I could use ?
I need your help.
Thank you for your attention.
Cheers,
Aleks