Posts: 5
Threads: 1
Joined: Dec 2017
Reputation:
0
Hello,
I'm a new user of Mixbus (Cakewalk refugee). I'm wondering if anyone is using IK Multimedia Arc 2 with Mixbus. If you are, could you explain how you're routing it? (i.e. Creating a monitor bus, straight onto the master, etc.etc.) Any help would be appreciated. Thanks.
P.S. Using an older ADK workstation, Win 7 64bit, Presonus Firepod 10
Posts: 1,437
Threads: 27
Joined: Sep 2013
Reputation:
34
12-04-2017, 11:10 AM
(This post was last modified: 12-04-2017, 11:10 AM by Frank.)
(12-04-2017, 09:52 AM)almeister_65 Wrote: Hello,
I'm a new user of Mixbus (Cakewalk refugee). I'm wondering if anyone is using IK Multimedia Arc 2 with Mixbus. If you are, could you explain how you're routing it? (i.e. Creating a monitor bus, straight onto the master, etc.etc.) Any help would be appreciated. Thanks.
P.S. Using an older ADK workstation, Win 7 64bit, Presonus Firepod 10
Hi Welkom
i am not using it , was wondering what it was.
Mixbus has a special monitor section, which comes after the master. Insert the plugin-m there in the processing section.
That is the proper place so it will not influence the master output
Regards
Frank
Frank W. Kooistra
- MMB32C 9.1, AD/DA: Motu:1248, 8A, 8D, Monitor8. X-Touch,, Mini M1 11.6.2, venture 13.3 plugins melda fabfilter harrison No Harrison CP-1
Posts: 5
Threads: 1
Joined: Dec 2017
Reputation:
0
(12-04-2017, 11:10 AM)Frank Wrote: (12-04-2017, 09:52 AM)almeister_65 Wrote: Hello,
I'm a new user of Mixbus (Cakewalk refugee). I'm wondering if anyone is using IK Multimedia Arc 2 with Mixbus. If you are, could you explain how you're routing it? (i.e. Creating a monitor bus, straight onto the master, etc.etc.) Any help would be appreciated. Thanks.
P.S. Using an older ADK workstation, Win 7 64bit, Presonus Firepod 10
Hi Welkom
i am not using it , was wondering what it was.
Mixbus has a special monitor section, which comes after the master. Insert the plugin-m there in the processing section.
That is the proper place so it will not influence the master output
Regards
Frank
Thanks, I've been doing some reading and it seems the monitor section may be my best option but I was curious as to how others may be doing it.
Posts: 84
Threads: 28
Joined: Apr 2014
Reputation:
0
I use ARC 2 for room correction and Sonarworks Reference 4 Headphone plugin for headphones. Only one is activated at a time. These plugins are inserted in the Mixbus monitor section like Frank already pointed out.
Tom
Intel i9-10920X @3,5GHz, 32 GB RAM, Samsung SSD 860 EVO 2 TB, SSD 860 PRO 2 TB, SSD 870 EVO Plus 1 TB, Mixbus 32c 7.x, Nuendo, Reaper, WIN 10 Pro, RME UFX+, Ferrofish A16 MKII, Faderport 16, AOC Monitor 32", K+H O300, K+S Tiny C5, analog outboard gear (Tegeler RC Creme + RZM, SSL Fusion, Neve 511 ...)
Posts: 5
Threads: 1
Joined: Dec 2017
Reputation:
0
(12-04-2017, 01:11 PM)dtb Wrote: I use ARC 2 for room correction and Sonarworks Reference 4 Headphone plugin for headphones. Only one is activated at a time. These plugins are inserted in the Mixbus monitor section like Frank already pointed out.
Tom
That looks like the way I'll be going. I'm at work now so I will have to try to set it up later. I believe my master outs are set too the main outs (L1/R2) of my FP10. From what I'm seeing in the manual, I can set the monitor outputs to those. Would I then mute the Master or set that to two outputs that aren't connected to my speakers?
Thanks for the help guys.
Posts: 1,437
Threads: 27
Joined: Sep 2013
Reputation:
34
(12-04-2017, 02:01 PM)almeister_65 Wrote: (12-04-2017, 01:11 PM)dtb Wrote: I use ARC 2 for room correction and Sonarworks Reference 4 Headphone plugin for headphones. Only one is activated at a time. These plugins are inserted in the Mixbus monitor section like Frank already pointed out.
Tom
That looks like the way I'll be going. I'm at work now so I will have to try to set it up later. I believe my master outs are set too the main outs (L1/R2) of my FP10. From what I'm seeing in the manual, I can set the monitor outputs to those. Would I then mute the Master or set that to two outputs that aren't connected to my speakers?
Thanks for the help guys.
In session properties select Use monitor section in this session
The monitor sections is automatically switched to your mon out
The master section get a monitor select button, where one can choose to enable or not the monitor section.
Exports are always done from the master out, so there are no worries that your monitor eq will interfere.
have fun
regards
frank
Frank W. Kooistra
- MMB32C 9.1, AD/DA: Motu:1248, 8A, 8D, Monitor8. X-Touch,, Mini M1 11.6.2, venture 13.3 plugins melda fabfilter harrison No Harrison CP-1
Posts: 5
Threads: 1
Joined: Dec 2017
Reputation:
0
(12-04-2017, 02:10 PM)Frank Wrote: (12-04-2017, 02:01 PM)almeister_65 Wrote: (12-04-2017, 01:11 PM)dtb Wrote: I use ARC 2 for room correction and Sonarworks Reference 4 Headphone plugin for headphones. Only one is activated at a time. These plugins are inserted in the Mixbus monitor section like Frank already pointed out.
Tom
That looks like the way I'll be going. I'm at work now so I will have to try to set it up later. I believe my master outs are set too the main outs (L1/R2) of my FP10. From what I'm seeing in the manual, I can set the monitor outputs to those. Would I then mute the Master or set that to two outputs that aren't connected to my speakers?
Thanks for the help guys.
In session properties select Use monitor section in this session
The monitor sections is automatically switched to your mon out
The master section get a monitor select button, where one can choose to enable or not the monitor section.
Exports are always done from the master out, so there are no worries that your monitor eq will interfere.
have fun
regards
frank
Awesome, again thanks guys!
Posts: 5
Threads: 1
Joined: Dec 2017
Reputation:
0
Just wanted to share that it worked great! Thanks again for the help. The manual is pretty helpful for most stuff but it's great to be able to get someones experience with a specific issue.
|