02-10-2016, 06:55 PM
I posted this a couple days ago, but in the wrong area...
Regarding the Meter Bridge...
It seems to be a little inconsistent:
Sometimes when I start up a mix, the Meter Bridge only includes the
channel strips, no MixBus or Master buses. Trying to stretch the right side of the window does not work.
I go to: Session -> Properties -> MeterBridge and see that "Show Busses"
and "Include Master Bus" are checked. I seem to have to un-check them,
save, re-check them, save and them alt-B. The newly displayed bridge
can now be stretched and the MixBus and Master meters are now visible.
Does anyone else experience this?
Thanks!
Patrick
------------------------
Now that I've had a couple more days to play with 3.1 I see that this is
indeed an unexpected behavior and very consistent. Here is what I found
to do in order to get a "full" MeterBridge:
- Open session, alt-B and notice that the meter bridge does not include
the MixBus or Master Bus and cannot be sized wider to the right.
- Session -> Properties -> Meterbridge
- uncheck "Show Busses" and "Include Master Bus"
- exit Properties
- Save session
- re-open Properties
- check "Show Busses" and "Include Master Bus"
- exit Properties
- Save session
- Close Session
- reopen session
MeterBridge should now be 1) visible and 2) resizable to show MixBusses
and Master Bus.
This seems very much like a bug. Fortunately it can be (inconveniently)
worked around, as I have provided above.
Cheers!
Patrick
Regarding the Meter Bridge...
It seems to be a little inconsistent:
Sometimes when I start up a mix, the Meter Bridge only includes the
channel strips, no MixBus or Master buses. Trying to stretch the right side of the window does not work.
I go to: Session -> Properties -> MeterBridge and see that "Show Busses"
and "Include Master Bus" are checked. I seem to have to un-check them,
save, re-check them, save and them alt-B. The newly displayed bridge
can now be stretched and the MixBus and Master meters are now visible.
Does anyone else experience this?
Thanks!
Patrick
------------------------
Now that I've had a couple more days to play with 3.1 I see that this is
indeed an unexpected behavior and very consistent. Here is what I found
to do in order to get a "full" MeterBridge:
- Open session, alt-B and notice that the meter bridge does not include
the MixBus or Master Bus and cannot be sized wider to the right.
- Session -> Properties -> Meterbridge
- uncheck "Show Busses" and "Include Master Bus"
- exit Properties
- Save session
- re-open Properties
- check "Show Busses" and "Include Master Bus"
- exit Properties
- Save session
- Close Session
- reopen session
MeterBridge should now be 1) visible and 2) resizable to show MixBusses
and Master Bus.
This seems very much like a bug. Fortunately it can be (inconveniently)
worked around, as I have provided above.
Cheers!
Patrick