How do I Calibrate Faderport v2

[RobinTX]

Hi folks;

I have a Presonus Faderport v2. and most functions work well with Harrison Mixbus32c v7 except of course the LINK feature, which does nothing but act as a scroll knob for the timeline.

However the Fader itself does NOT match up with the fader in the DAW. TO get the DAW fader to null or "unity" the faderport fader must be slightly higher, about +2.

There should be a way to calibrate the faders, so the control is accurate. so that 0 is 0, Unity is unity and infinity is infinity.

Does anyone have a suggestion?


Thanks for any advice.

[Dingo]

It would appear that the issue lies with the Presonus as multiple users of multiple DAW's are reporting the same issue...
https://answers.presonus.com/30861/fader...y-position
This article might help..
https://answers.presonus.com/21410/inacc...r-position

[RobinTX]

Thank you that. It was easy to calibrate in REAPER as I could st preferences to a fader ratio of 10 instead of 12. Once set to 10 the fader tracked perfectly... I was kinda' hoping for a similar feature and simple fix in Mixbis32C.. But I will check out those Presonus pages for sure. Thanks Again!