Posts: 81
Threads: 21
Joined: Nov 2018
Reputation:
3
A minor issue, but a frustrating one: when scrolling through tracks, it's very difficult to avoid touching the send sliders on those tracks. I'm sending sidechain signals I don't want to adjust, and it's actually quite a nuisance to return these sliders to the zero position. They don't seem to double-click back to zero. A lock tickbox on the end slider in the pin configuration dialogue would fix my issue perfectly (i.e., "lock send level") for each SC send.
Thank you for your consideration.
Posts: 3,101
Threads: 54
Joined: Oct 2013
Reputation:
170
07-24-2021, 08:18 PM
(This post was last modified: 07-24-2021, 08:23 PM by Dingo.)
Shift+Click will return the send to zero.
If you want to just set to zero and leave it that way, double click on the bus tab to reveal that in the fader strip.
Set the send to P for automation Play, it will default and lock to zero unless you write a different value for length of song.
Macmini 8,1 | OS X 13.6.3 | 3 GHz i5 32G | Scarlett 18i20 | Mixbus 10 | PT_2024.3.1 ..... Macmini 9,1 | OS X 14.4.1 | M1 2020 | Mixbus 10 | Resolve 18.6.5
Posts: 81
Threads: 21
Joined: Nov 2018
Reputation:
3
Ok, well shift-click does the trick. I'll try the other thing if it's still happening too much. Thanks!
