+- Harrison Mixbus Forum (https://forum.harrisonconsoles.com)
+-- Forum: Mixbus User Forum (https://forum.harrisonconsoles.com/forum-1.html)
+--- Forum: Mixbus Customization & Remote Control (https://forum.harrisonconsoles.com/forum-10.html)
+--- Thread: more than 2 Mackie extendere (/thread-11825.html)
more than 2 Mackie extendere - CopyRon - 04-19-2024
Anybody writing script to run additional extenders?
RE: more than 2 Mackie extendere - Armando Rivera26 - 04-19-2024
[attachment=3737][attachment=3738][attachment=3739]So I am a new Mixbus 10 user, I also use Bitwig.
On Bitwig, when adding a controller, under Mackie, It lets you add up to 4 different devices under 1 container. This allow for all 4 devices run as 1 control surface.
I'm using 4 Streamdecks xl as as a 32 tracks - full track (8 tracks per device).
Now when I'm on Mixbus, Under Control Surfaces, the mackie set up only allows 1 device. But when I tried Tascam US-2400, it kind of worked because it is the only one that allows up to 4 devices, but a lot of elements were gone.
Please, I would love for someone to help out. I attached some photos for some ideas.
RE: more than 2 Mackie extendere - Armando Rivera26 - 04-21-2024
(04-19-2024, 01:07 PM)CopyRon Wrote: Anybody writing script to run additional extenders?<?xml version="1.0" encoding="UTF-8"?>
<MackieProtocolDevice>
<Name value="Mackie 3xt"/>
<Strips value="8"/>
<MasterFader value="yes"/>
<TimecodeDisplay value="yes"/>
<TwoCharacterDisplay value="yes"/>
<Extenders value="3"/>
<MasterPosition value="1"/>
<GlobalControls value="yes"/>
<JogWheel value="yes"/>
<TouchSenseFaders value="yes"/>
<NoHandShake value="yes"/>
<HasMeters value="yes"/>
</MackieProtocolDevice>
RE: more than 2 Mackie extendere - Armando Rivera26 - 04-21-2024
(04-19-2024, 01:07 PM)CopyRon Wrote: Anybody writing script to run additional extenders?
That's the Script for 3 extenders, I had the same issue, but a member in here helped me out , so really thanks to him.
https://forum.harrisonconsoles.com/user-8075.html
RE: more than 2 Mackie extendere - Dingo - 04-21-2024
https://forum.harrisonconsoles.com/thread-11832-post-67204.html#pid67204
https://forum.harrisonconsoles.com/thread-7998-post-45277.html#pid45277
RE: more than 2 Mackie extenders - CopyRon - 04-22-2024
Thank you all for your help.
OK got 4 extenders and one master control in position 5, but is it possible to extenders at 1 and 2 controller at 3 and extender at 4 and second controller at 5.
Is it possible to add second controller?
Faders don't seem to be selecting track, is that possible?
RE: more than 2 Mackie extenders - Armando Rivera26 - 04-23-2024
(04-22-2024, 10:55 AM)CopyRon Wrote: Thank you all for your help.
OK got 4 extenders and one master control in position 5, but is it possible to extenders at 1 and 2 controller at 3 and extender at 4 and second controller at 5.
Is it possible to add second controller?
Faders don't seem to be selecting track, is that possible?
Hope this makes it easier to Understand
RE: more than 2 Mackie extendere - CopyRon - 04-23-2024
Yes I got that but I want to add a second master controller, is that possible?
RE: more than 2 Mackie extendere - Armando Rivera26 - 04-23-2024
(04-23-2024, 06:10 PM)CopyRon Wrote: Yes I got that but I want to add a second master controller, is that possible?
Try Changing the value on the "Extender value", but I'm not sure if that will work. One thing that I experienced, Every time a changed the master position my loop midi crashed, even closing the program didn't help, so I had to reset the pc every time it happened.
Anyway Best of luck.