Mixbus 32C 8.2.170 does not work (SOLVED) - Printable Version +- Harrison Mixbus Forum (https://forum.harrisonconsoles.com) +-- Forum: Mixbus User Forum (https://forum.harrisonconsoles.com/forum-1.html) +--- Forum: Mixbus Support (Linux) (https://forum.harrisonconsoles.com/forum-7.html) +--- Thread: Mixbus 32C 8.2.170 does not work (SOLVED) (/thread-11170.html) |
Mixbus 32C 8.2.170 does not work (SOLVED) - Sojuzstudio - 02-14-2023 Does the latest version Mixbus 32C 8.2.170 work on others? It won't start after installation. Freezes Plugin scan at startup(vst). Plugin scanning should be disabled by default when starting. AvLinux MXE latest version. The earlier Micbus 32C version works completely normally. RE: Mixbus 32C 8.2.170 does not work - Jostein - 02-15-2023 Works fine here on my Kubuntu 22.04-based system. Any output that can give you a hint if you open a console and start it from the command line? RE: Mixbus 32C 8.2.170 does not work - Sthauge - 02-15-2023 (02-14-2023, 04:22 PM)Sojuzstudio Wrote: Does the latest version Mixbus 32C 8.2.170 work on others? It won't start after installation. Freezes Plugin scan at startup(vst). Plugin scanning should be disabled by default when starting. Ok here as well. Thought I have not done any plugin scan. Kubuntu 22.10. RE: Mixbus 32C 8.2.170 does not work - wavesound - 02-15-2023 Hi Works on Ubuntu studio 22.04 so far. Cheers RE: Mixbus 32C 8.2.170 does not work - Sojuzstudio - 02-15-2023 (02-15-2023, 04:08 AM)Jostein Wrote: Works fine here on my Kubuntu 22.04-based system. Any output that can give you a hint if you open a console and start it from the command line?The long story ends as follows: (mixbus32c-8.2.170:5565): glibmm-CRITICAL **: 21:51:25.629: unhandled exception (type Glib::Error) in signal handler: domain: g_convert_error code : 1 what : Invalid byte sequence in conversion input RE: Mixbus 32C 8.2.170 does not work - Jostein - 02-15-2023 I'm no expert on this, but it looks like a language problem/bug. What happens if you first type this in your console (if you are not using English locale): export LANG=en_US.UTF-8 export LANGUAGE=en_US.UTF-8 ..and then run again from the same console window as the export commands? You might even change all the LC_* environment variables as well. RE: Mixbus 32C 8.2.170 does not work - pavianaudio - 02-16-2023 (02-14-2023, 04:22 PM)Sojuzstudio Wrote: Does the latest version Mixbus 32C 8.2.170 work on others? It won't start after installation. Freezes Plugin scan at startup(vst). Plugin scanning should be disabled by default when starting. My setup is same, AvLinux MXE 21.3 and yesterday updated Mixbus 32C 8.2.170, normaly works. I using default locales, because I had Mixer save/recall settings Pavol RE: Mixbus 32C 8.2.170 does not work - Sojuzstudio - 02-16-2023 (02-15-2023, 04:59 PM)Jostein Wrote: I'm no expert on this, but it looks like a language problem/bug. What happens if you first type this in your console (if you are not using English locale): Thanks for the answers. I'll look at this later today when I get to the machine... RE: Mixbus 32C 8.2.170 does not work - Sojuzstudio - 02-16-2023 (02-15-2023, 04:59 PM)Jostein Wrote: I'm no expert on this, but it looks like a language problem/bug. What happens if you first type this in your console (if you are not using English locale): Tested, same error message. I installed the newly released Ardour 7.3.0 and it works fine here. There is something strange here. RE: Mixbus 32C 8.2.170 does not work - tseaver - 02-16-2023 Just a guess: you might be seeing an apparent hang due to the b0rken Code: drowaudio_flanger |