04-19-2024, 01:07 PM
04-19-2024, 09:10 PM
[attachment=3737][attachment=3738][attachment=3739]So I am a new Mixbus 10 user, I also use Bitwig.
On Bitwig, when adding a controller, under Mackie, It lets you add up to 4 different devices under 1 container. This allow for all 4 devices run as 1 control surface.
I'm using 4 Streamdecks xl as as a 32 tracks - full track (8 tracks per device).
Now when I'm on Mixbus, Under Control Surfaces, the mackie set up only allows 1 device. But when I tried Tascam US-2400, it kind of worked because it is the only one that allows up to 4 devices, but a lot of elements were gone.
Please, I would love for someone to help out. I attached some photos for some ideas.
On Bitwig, when adding a controller, under Mackie, It lets you add up to 4 different devices under 1 container. This allow for all 4 devices run as 1 control surface.
I'm using 4 Streamdecks xl as as a 32 tracks - full track (8 tracks per device).
Now when I'm on Mixbus, Under Control Surfaces, the mackie set up only allows 1 device. But when I tried Tascam US-2400, it kind of worked because it is the only one that allows up to 4 devices, but a lot of elements were gone.
Please, I would love for someone to help out. I attached some photos for some ideas.
04-21-2024, 04:02 PM
(04-19-2024, 01:07 PM)CopyRon Wrote: [ -> ]Anybody writing script to run additional extenders?<?xml version="1.0" encoding="UTF-8"?>
<MackieProtocolDevice>
<Name value="Mackie 3xt"/>
<Strips value="8"/>
<MasterFader value="yes"/>
<TimecodeDisplay value="yes"/>
<TwoCharacterDisplay value="yes"/>
<Extenders value="3"/>
<MasterPosition value="1"/>
<GlobalControls value="yes"/>
<JogWheel value="yes"/>
<TouchSenseFaders value="yes"/>
<NoHandShake value="yes"/>
<HasMeters value="yes"/>
</MackieProtocolDevice>
04-21-2024, 04:06 PM
(04-19-2024, 01:07 PM)CopyRon Wrote: [ -> ]Anybody writing script to run additional extenders?
That's the Script for 3 extenders, I had the same issue, but a member in here helped me out , so really thanks to him.
https://forum.harrisonconsoles.com/user-8075.html
04-21-2024, 10:41 PM
04-22-2024, 10:55 AM
Thank you all for your help.
OK got 4 extenders and one master control in position 5, but is it possible to extenders at 1 and 2 controller at 3 and extender at 4 and second controller at 5.
Is it possible to add second controller?
Faders don't seem to be selecting track, is that possible?
OK got 4 extenders and one master control in position 5, but is it possible to extenders at 1 and 2 controller at 3 and extender at 4 and second controller at 5.
Is it possible to add second controller?
Faders don't seem to be selecting track, is that possible?
04-23-2024, 03:27 PM
(04-22-2024, 10:55 AM)CopyRon Wrote: [ -> ]Thank you all for your help.
OK got 4 extenders and one master control in position 5, but is it possible to extenders at 1 and 2 controller at 3 and extender at 4 and second controller at 5.
Is it possible to add second controller?
Faders don't seem to be selecting track, is that possible?
Hope this makes it easier to Understand
04-23-2024, 06:10 PM
Yes I got that but I want to add a second master controller, is that possible?
04-23-2024, 06:37 PM
(04-23-2024, 06:10 PM)CopyRon Wrote: [ -> ]Yes I got that but I want to add a second master controller, is that possible?
Try Changing the value on the "Extender value", but I'm not sure if that will work. One thing that I experienced, Every time a changed the master position my loop midi crashed, even closing the program didn't help, so I had to reset the pc every time it happened.
Anyway Best of luck.