Posts: 8
Threads: 4
Joined: Jan 2015
Reputation:
0
A friend of mine sent me one of his MIDI files. After importing it to MB3.1 everything comes up on the record screen as it should. I hit play and on the record screen it show that the tracks are playing. But, there is no out put. If I go to the mixer screen it shows no levels at all. I'm not sure where or how to route these to the mixer for output. Any suggestions?
David
Posts: 32
Threads: 7
Joined: Jan 2016
Reputation:
0
There are virtual instruments, those are the plugins. It's just you have to assign one. If you need help in assigning one we can help I think so.
Posts: 4
Threads: 2
Joined: Aug 2020
Reputation:
0
Same issue. It is not an absence of assigning an instrument. It just doesn't work, or you need a degree in midi electronics and routing. I have assigned an instrument. 32c virtual keyboard can control it and produce the sound, but as soon as you put in a midi track - for you geniuses out there who know everything but cant be bothered, a midi track is what the other side of the class class a "midi file". midi information.
Mixbus has no use for it. Cant read or translate it. Levels flying up and down, NO SOUNDS.
Any help? Dounbt it. Nobody cares at all.
Posts: 3,103
Threads: 54
Joined: Oct 2013
Reputation:
170
09-01-2020, 06:24 AM
(This post was last modified: 09-01-2020, 06:25 AM by Dingo.)
I just tested by importing a .midi file from the net (Bohemian Rhapsody), the file plays just fine, I can change instruments on the channels and hear audio.
Make sure you are not set to input mode on the MIDI channel.
http://www.harrisonconsoles.com/mixbus/m...rding-midi
Macmini 8,1 | OS X 13.6.3 | 3 GHz i5 32G | Scarlett 18i20 | Mixbus 10 | PT_2024.3.1 ..... Macmini 9,1 | OS X 14.4.1 | M1 2020 | Mixbus 10 | Resolve 18.6.5
Posts: 3,077
Threads: 61
Joined: Oct 2013
Reputation:
110
09-01-2020, 06:26 AM
(This post was last modified: 09-01-2020, 06:30 AM by madmaxmiller.)
(09-01-2020, 06:24 AM)Dingo Wrote: I just tested by importing a .midi file from the net (Bohemian Rhapsody), the file plays just fine, I can change instruments on the channels and hear audio.
Make sure you are not set to input mode on the MIDI channel.
http://www.harrisonconsoles.com/mixbus/m...rding-midi
Same here. Tested on my office computer.
MMM
(08-31-2020, 09:27 PM)trbjazz_69 Wrote: Any help? Dounbt it. Nobody cares at all.
Actually, a lot of people here do care.
How about you describe exactly what you have done so far, maybe some screenshots help, too.
MMM
Linux throughout!
Main PC: XEON, 64GB DDR4, 1x SATA SSD, 1x NVME, MOTU UltraLite AVB
OS: Debian11 with KX atm
Mixbus 32C, Hydrogen, Jack... and Behringer synths